CERTIFIED KNX PARTNER SINCE 2013
From the system design to commissioning with ETS, through to choosing the brands and products that suit what you want to achieve. One contact, independent of manufacturers, a certified KNX Partner since 2013.
01 — What we do
You can entrust us with the whole system from the start, or only the programming of a system someone else designed, or just an opinion before you buy. Each service has its own quote.
The bus structure before the products: topology, lines, power supplies, devices, integration with the electrical installation and with the other systems.
Group addresses, parameters, scenes and logic written in ETS, then commissioning on site with a test of every function.
Before you buy: which product category you need for what you want to do, which brands are a reference for that function, and what to avoid.
02 — Selection guide
KNX is a standard: devices from different manufacturers talk to each other. That is its strength, and it is why the choice must be made function by function, not from a catalogue. The brands listed are references on the Italian market, not the only route.
| Type | What you need | Reference brands | Note |
|---|---|---|---|
| Lighting | Wall push-buttons and sensors, on/off and dimming actuators, DALI gateway for offices and retail. | ABBBticinoEkinexGiraJungMDTSiemensThebenVimarZennio | You choose the look of the switch; the dimmer must match the light source. |
| Climate | Thermostats and sensors, valve and fan-coil actuators, integration with heat pump or boiler. | ABBBticinoEkinexGiraJungMDTSiemensThebenVimarZennio | What matters is zone control and the dialogue with the generator. |
| Blinds and shading | Shutter actuators with position feedback, weather station for sun and wind, dedicated push-buttons. | ABBBticinoEkinexGiraJungMDTSiemensThebenVimarZennio | The weather station protects the blinds and saves on climate control. |
| Supervision and apps | Visualisation server, touch panels, smartphone access, voice control. | ABBBticinoEkinexGiraJungMDTSiemensThebenVimarZennio | Choose for longevity and updates, not for the prettiest app today. |
| Energy and solar PV | Energy meters, load management, self-consumption priority, EV charging. | ABBBticinoEkinexGiraJungMDTSiemensThebenVimarZennio | You need a meter at every point where you want to decide. |
| Security and access | Window contacts, detectors, technical alarms (water, gas), integration with intruder alarm and video entry. | ABBBticinoEkinexGiraJungMDTSiemensThebenVimarZennio | The intruder alarm remains a certified system in its own right: KNX integrates it, it does not replace it. |
How we choose
Already have a product in mind?
Send us the model, or the function you want to achieve, and we tell you whether it suits, what it needs around it and whether there is a better alternative. It is the quickest request we get.
Ask about a product03 — KNX news
The latest news from KNX Italia — events, awards, the magazine — read from their feed and updated on its own. Every item links to the source. The items are in Italian.
04 — Quote and advice
The more detail you give, the more accurate the quote. If you don't know something, leave it blank: we will ask.
What happens next
We read the request
If something is missing for a serious quote, we write back with a couple of questions.
We reply with a proposal
For programming: what it includes, timing, what you receive. For advice: a clear written opinion.
You decide
No commitment until you confirm. If all you need is the opinion, it ends there.
Frequently asked questions
Design decides the structure of the system and which devices are needed, before they are bought. Programming writes in ETS how those devices must behave and commissions them on site. They can be entrusted separately: we often program systems designed by others.
Yes, that is the point of KNX: certified products talk to each other regardless of the manufacturer. The choice must still be made carefully, function by function, because not every product does everything the same way. That is exactly the advice we offer.
Yes, to extend it or reprogram it. We need the existing ETS project, if there is one; if there is not, it is rebuilt by reading the devices, and we tell you beforehand what that involves.
It depends on the number of devices and functions, not on the number of rooms. That is why the form asks for points and functions: with that data the quote is accurate, with no surprises afterwards.
We design the electrical installation and the KNX system together, so the bus is planned with the distribution rather than added afterwards. Execution is by the installer, with whom we coordinate the work.